GE ECBS68 Owner's Manual page 16

Using the clock, timer and convenience outlet.
Not all features are on all models.
OR
16
To Reset the Timer
If the display is still showing the time
remaining, you may change it by touching
the TIMER pad, then touch the + or – pads
until the time you want appears in the
display.
To Cancel the Timer
Touch the TIMER pad twice.
End of Cycle Tones
(on some models)
Clear the tones by pressing the pad
of the function you are using.
Power Outage
If a flashing time is in the display, you have
experienced a power failure. Reset the clock.
Convenience Outlet
(on some models)
The 120V convenience outlet located
on the top of the backguard may be used
to plug in small electrical appliances.
When using the outlet, be sure that
the electrical cord does not rest on or near
a surface unit. If the surface unit is turned
on, the cord will be damaged.
(on some models)
If the remaining time is not in the display
(clock, delay start or cooking time are in
the display), recall the remaining time by
touching the TIMER pad and then touching
the + or – pads to enter the new time
you want.
To reset the clock, touch the CLOCK pad
twice. Enter the correct time of day by
touching the + or – pads. Touch the
START/ON pad.
To reset the circuit breaker, press
the switch located near the outlet
on top of the backguard.