Method 2 - Poe Without Poe Switch Or Router - D-Link DAP-2330 User Manual
Wireless n300
single band gigabit poe access point
Hide thumbs
Also See for DAP-2330:
- Quick install manual (17 pages) ,
- Quick installation manual (48 pages)
Table of Contents
Advertisement
Section 2 - Installation
Method 2 - PoE without PoE Switch or Router
1. Connect one end of an Ethernet cable into the Data In port on the PoE base unit and the other end into one port on your switch, router, or computer.
2. Connect one end of an Ethernet cable into the P+Data Out port on the PoE base unit and the other end into the LAN (PoE) port on the Access Point.
3. Use the supplied power adapter. Connect the power adapter to the Power In receptor on the PoE adapter.
4. Connect the power cable to the power adapter and then connect the other end into a power outlet.
DAP-2330
PoE Base Unit
Power Adapter
PC
Switch or Router
9
D-Link DAP-2330 User Manual
Advertisement
Table of Contents
