D-Link DAP-2330 User Manual page 29

Wireless n300 single band gigabit poe access point

Hide thumbs Also See for DAP-2330:

Table of Contents

Section 3 - Configuration

RSSI Threshold:

When RSSI is selected in the Aging out drop-down menu, select the percentage of RSSI here. When the RSSI of wireless

clients is lower than the specified percentage, the device disconnects the wireless clients.

Data Rate Threshold:

When Data Rate is selected in the Aging out drop-down menu, select the threshold of data rate here. When the data

rate of wireless clients is lower than the specified number, the device disconnects the wireless clients.

ACL RSSI:

Use the drop-down menu to Enable the function. When enabled, the device denies the connection request from the

wireless clients with the RSSI lower than the specified threshold below.

Set the ACL RSSI Threshold.

ACL RSSI Threshold:

D-Link DAP-2330 User Manual

Table of Contents