Table of Contents
Advertisement
GETTING STARTED - INITIAL SET UP
IMPORTANT - AFTER TUNING DO NOT PRESS ANY BUTTONS FOR 20 SECONDS SO THE CHANNEL
TUNING IN
IMPORTANT — Please ensure the TV has
reached room temperature before
connecting the power for the first time
1) Connect the mains lead to your electrical outlet
2) Connect the RF Cable supplied to the
'RF' on the rear of the TV and connect
the other end of the cable to your TV Aerial outlet
3) Install batteries in the remote control and press
the [STANDBY] button to turn on the TV.
The 'First Time Installation' menu should
now appear. If it does not, please press
[LCD-MENU] 8888 the menu will appear.
4) Press [OK] on the remote control whilst 'OK'
is highlighted on screen.
Country
Language
Please ensure that the aerial is connected to the connector
labelled ' RF In ' on the rear of the TV .Ensure that OK is
highlighted in yellow and press 'OK' on your remote .If after
this scan ,not all digital channels are found ,your aerial may
require a signal booster .alternatively ,upgrade your aerial
Tuning will now take place.
IMPORTANT - WE RECOMMEND YOU CONNECT TV'S WITH BUILT IN DIGITAL/FREEVIEW TO SUITABLE
AERIALS. I.E LOFT AERIAL OR OUTDOOR ROOF AERIAL. ALSO, PLEASE CHECK YOU LIVE IN AN AREA
THAT CAN RECIEVE DIGITAL/FREEVIEW STATIONS. WE DO NOT RECOMMEND USING WITH INDOOR
AERIALS UNLESS YOU ARE IN 100% COVERAGE AREA AND ALSO THAT THE INDOOR AERIAL IS
AMPLIFIED/HAS BUILT IN BOOSTER AND IS CAPABLE OF RECIEVING DIGITAL/FREEVIEW. WE RECIEVE
MANY CALLS TO OUR HELPLINE FROM CUSTOMERS ADVISING THEY CANNOT RECIEVE
DIGITAL/FREEVIEW CHANNELS. OFTEN, SIMPLY CONNECTING A 'BOOSTER' BOX IN BETWEEN THE TV
AND THE AERIAL SOCKET SOLVES 95% OF CASES. BOOSTERS/AMPLIFIERS ARE AVAILABLE FOR
INFORMATION CAN BE STORED.
DISPLAY
First Time Installation
UK
English
to a high gain digital version .
OK
Cancel
AROUND £10-£15 FROM MOST RETAILERS
"OK" should be highlighted on screen. Press [OK]
The TV channels will now tune in.
If no channels are found the following screen will appear,
please refer to additional information below.
RE-TUNING TV
In order to keep up to date with all the latest channels
available on Freeview you should re-tune your television
every few months. This can be done in the following way:
1) Press [LCD-MENU] 8888. The first time installation
menu will appear
2) Press [OK] on the remote control whilst 'OK' is
highlighted on screen
Tuning will now take place and any new channels will be
added automatically in the correct places as broadcasted.
5
Advertisement
Table of Contents
