Page 1: Table Of Contents
Instruction Manual Weather Station model 02038 / 02041 CONTENTS Unpacking Instructions ... 2 Placement Guidelines ..... 8 Package Contents ....2 Using the Weather Station..9 Product Registration ....2 Troubleshooting ....10 Features & Benefits: Sensor..2 Care & Maintenance.....12 Features &...
Page 2: Unpacking Instructions
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product.
Page 3: Features & Benefits: Display
Features & Benefits 20 19 18 17 16 DISPLAY UNIT 1. Outdoor Sensor Signal Strength 10. Low/High Humidity Records 2. Current Outdoor Temperature Lowest and highest indoor humidity recorded since midnight. Arrow icon indicates the direction the 11. Humidity Level Indicator temperature is trending.
Page 4 Features & Benefits BACK OF DISPLAY UNIT 5. Battery Compartment 6. Reset Button 1. All-Time Records Button Full reset to factory defaults. Press to access all-time high and low records. 7. Battery Compartment Cover 2. “ “ Button 8. Plug-in for Power Adapter For setup preferences.
Page 5: Setup
A-B-C switch setting inside the battery Install or Replace Batteries compartment for display unit AcuRite recommends high quality setup. alkaline or lithium batteries in 2. Insert 2 x AA batteries into the outdoor sensor for the best the battery compartment, as product performance.
Page 6: Display Setup
Display Unit Setup Set the A-B-C Switch compartment cover. Locate the A-B-C switch inside 2. Insert 3 x AA alkaline batteries the battery compartment. Set into the battery compartment, the A-B-C switch to A, B or C. as shown. Follow the polarity You must select the same letter (+/–) diagram in the battery choices for both the display unit...
Page 7: Intelli-Time ® Clock
Intelli-Time Clock ® Intelli-Time products are pre-programmed with the correct time and date. Intelli-Time technology instructs the time and date to set themselves. All you need to do is select your Time Zone and Daylight Saving Time preferences. The clock will then automatically set itself and change for Daylight Saving Time. Set the Time, Date &...
Page 8: Placement Guidelines
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and outdoor sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and dust. Display unit stands upright for tabletop use or is wall-mountable.
Page 9: Using The Weather Station
Weather Forecast AcuRite’s patented Self-Calibrating Forecasting provides your personal forecast of weather conditions for the next 12 to 24 hours by collecting data from the sensor in your backyard. It generates a forecast with pinpoint accuracy - personalized for your exact location.
Page 10: Troubleshooting
LOW records. To manually clear all of today’s HIGH recorded values, press and hold the “ ” button for 2 seconds. Dashes display to confirm you have cleared the HIGH records. Press the “ ” button to cycle through the all-time high and low recorded values (one record is shown at a time) for outdoor and indoor temperature and humidity.
Page 11 (see page 13). Once the new battery is installed, changed and the time and date will need to be set manually. time is not correct If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance.
Page 12: Care & Maintenance
Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Outdoor Sensor Care Clean with a soft damp cloth. Do not use caustic cleaners or abrasives. Calibration The indoor / outdoor temperature and humidity readings, and barometric pressure can be calibrated on the display unit to improve accuracy.
Page 13: Replace Intelli-Time Battery
Replace Intelli-Time Battery Intelli-Time technology is powered by a pre-installed coin-cell battery that stores the time and date settings. The battery has a shelf life of several years. To replace the CR2032 Intelli-Time battery: 1. Locate the coin cell battery compartment door on the back of the display unit.
Page 14: Specifications
Specifications TEMPERATURE RANGE Outdoor: -40ºF to 158ºF; -40ºC to 70ºC Indoor: 32ºF to 122ºF; 0ºC to 50ºC HUMIDITY RANGE Outdoor: 1% - 99% RH (relative humidity) Indoor: 16% - 98% RH WIRELESS RANGE 330 ft / 100 m depending on home construction materials OPERATING FREQUENCY 433 MHz POWER...
Page 15: Customer Support
Customer Support AcuRite customer support is committed to providing you with best-in- class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 info@chaney-inst.com AcuRite 24/7 support at www.
Page 16 Plan your day with confidence ™ www.AcuRite.com ©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copy- rights are the property of their respective owners. AcuRite uses patented technology.

This manual is also suitable for:

02041

AcuRite 02038 Instruction Manual

Quick Links

Related Manuals for AcuRite 02038

Summary of Contents for AcuRite 02038

This manual is also suitable for:

Table of Contents