9. CALIBRATION
9.1.2 Setup file (Info_Db.txt)
/*auto*/[Default]=[U8500]
➀
➁
/*cal*/[2.75G_ADI_A7150_EDGE]=[..
Main_Seq uence.dll]
/*auto*/[U8500]=[..
/*auto*/[C1300]=[..
[ezlooks]=[on]
[batcal]=[off]
[svc]=[off]
[standalone]=[off]
[tescom]=[off]
[process]=[auto]
➃
➄
[U8500]=[..
Auto_Model
Spec_U8500.xml,..
1 : Indication of 'cal process' or 'auto process'.
2 : Model name which is displayed on Hot Kimchi program
3 : Relative path of Main_Sequence.dll from Hot_KimchiD.exe
4 : Auto model name
5 : Relative path of auto model procedure, spec, setting file from Hot_KimchiD.exe
➂
Cal_Model
RF_Auto
Main_SequenceD.dll]
RF_Auto
Main_SequenceD.dll]
You can change this as 'on' or 'off'
(should be in lower case; on, off)
You can change this as 'auto' or 'cal'
(should be in lower case; on, off)
U8500
Procedure_U8500.xml,..
Auto_Model
U8500
2.75G_ADI_A7150_EDGE_Ver0.5_Ezlooks
AutoSetup.xml]
- 162 -
Auto_Model
U8500