SolarGoesGreen SGG-S24-CW Quick Start Manual

DESCRIPTION

The SGG-S24 is designed as a stand-alone spotlight which automatically illuminates at dusk. It is completely solar powered and
must be installed in position where the solar panel will receive the maximum sun per day. It's energy-saving, auto switches
on/off, and has an appealing design.
The unit has twin spotlights with 12 super bright LEDs and two Li-ion rechargeable batteries which are easily replaced. The
SGG-S24 can easily be installed and used in a broad range of applications such as gardens, yards, walls, signs, flags etc.

PARTS

Solar panel with integrated battery box
2 each- 12 Super Bright LED lamps
2 each - Spike for lamp
Solar Panel spike
*Optional Flat Mount Kits
*Optional Pole Mount Kits
*Optional 9' wire kit
*Please contact your retailer to purchase optional mount and wire kits.

INSTALLATION

I. Solar Spot Light

Installation Of The Solar Panel

Choose a place to locate the unit where there is abundant and unobstructed sunshine during the day. Any cover or
shade on the solar panel will affect its performance to charge the batteries resulting in a shorter run time of the lights
during the night (Fig.1). IDEAL LOCATION OF THE SOLAR PANEL WILL BE FACING SOUTH AT A 45 DEGREE ANGLE TO THE
HORIZON.

The solar panel is adjustable. Adjust the angle of solar panel to 45 degrees for best results. The selected location should
not be near a night time light source like a porch or street light. If the panel receives prolonged ambient light on it at
any time during it will not allow the automatic day/night sensor to turn the lights on.
SolarGoesGreen SGG-S24-CW
READ AND FOLLOW ALL INSTRUCTIONS BEFORE OPERATING YOUR SOLAR LIGHT.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Fig.1
Fig.2
Page 1 of 3