Table of Contents
Advertisement
P A N D O R A ®
Play and operate Pandora internet radio from your iPhone
audio system. Standard data rates apply.
P l a y i n g P a n d o r a
1. Open the front console, and pull
out the USB adapter cable.
Connect the cable to your
iPhone dock connector.
2. Open Pandora from your phone.
Press HDD/AUX until Pandora
appears and streaming begins.
Notes:
• If the Pandora app is not selected on your phone, iPod music is played.
• If you shut down the Pandora app, you must reopen it on your phone to
resume play.
• If you cannot operate Pandora through the audio system, it may be
streaming through Bluetooth
on the audio system.
iPhone is a registered trademark of Apple Computer, Inc., registered in the U.S. and other countries.
36
30
through your vehicle's
®
3. From the audio screen, select
items such as Station List,
Like/Dislike, and
Pause/Resume.*
Audio. Make sure to select Pandora mode
®
*Menu functions not available on all phones
H O M E L I N K ®
Program your vehicle to operate up to three remote-controlled devices around your
home, such as garage doors, lighting, or home security systems.
T r a i n i n g a B u t t o n
1
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.
2
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
NO
a
Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
NO
If you have any problems programming HomeLink, see the owner's manual
included with the device you are trying to program, call HomeLink at
(800) 355-3515, or visit www.homelink.com.
3
Press and hold the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
NO
4
Training
Press and hold
complete
the HomeLink
button again.
HomeLink indicator
HomeLink LED
YES
flashes for 2 seconds,
remains on.
then remains on.
a
The remote has a rolling code.
Press the "learn" button on the
remote-controlled device (e.g.,
garage door opener).
b
Within 30 seconds, press and
hold the programmed HomeLink
YES
button for 2 seconds.
5
Press the programmed HomeLink
button again; the remote-controlled
device should operate.
YES
37
Advertisement
Table of Contents
