Table of Contents
Advertisement
▶
RapidStart Display Save/Restore [Enabled]
Enables or disables the Intel Rapid Start Display screen to be saved or restored.
The screen will be saved before the system enters sleep mode. Then the system
will restore the screen when wakened.
[Enabled]
Enables this function.
[Disabled]
Disables this function.
▶
RapidStart Display Type [BIOS Save/Restore]
Selects the screen type of Intel Rapid Start Display.
[BIOS Save/Restore]
[DeskTop Save/Restore]
▶
LakeTiny Feature [Disabled]
Enables or disables Intel Lake Tiny technology with iRST for SSD. This item
appears when "Intel C-State" is enabled.
[Enabled]
Enhance the dynamic IO load adjusted performance for accelerating
the SSD speed.
[Disabled]
Disables this feature.
▶
USB Configuration
Sets the onboard USB controller and device function. Press <Enter> to enter the sub-
menu.
▶
USB Controller [Enabled]
Enables or disables the onboard USB controller.
▶
Legacy USB Support [Enabled]
Sets Legacy USB function support.
[Auto]
The system will automatically detect if any USB device is connected
and enables or disables the legacy USB support.
[Enabled]
Enable the USB support for legacy operating systems that do not
support USB.
[Disabled]
The USB devices are available only for UEFI applications.
▶
Onboard USB3.0 Controller [Enabled]
Enables or disables the external USB 3.0 controller.
▶
Intel(R) Smart Connect Configuration
Sets Intel Smart Connect Technology for optimizing system network performance in
sleep mode. Press <Enter> to enter the sub-menu.
▶
Intel(R) Smart Connect Technology [Enabled]
Enables or disables Intel(R) Smart Connect Technology. This feature can update
applications (ex. email and social networks) by periodically waking your system
from sleep mode. And you do not need to wait for the applications to update when
you wake up the system.
[Enabled]
Enables Intel smart connect technology.
[Disabled]
Disables Intel smart connect technology.
▶
Power Management Setup
Sets system Power Management of EuP2013 and AC Power Loss behaviors. Press
<Enter> to enter the sub-menu.
BIOS Setup
The BIOS POST splash screen will be saved/ restored.
The desktop image will be saved/ restored.
3-10
Advertisement
Table of Contents
