TG641x_QG(e).fm Page 7 Thursday, November 27, 2008 4:48 PM
Registering a handset to a base unit
The supplied handset and base unit are pre-registered. If for some reason the
handset is not registered to the base unit, re-register the handset.
Handset
{MENU} i {#}{1}{3}{0}
Base unit
Press and hold {LOCATOR} for about
4 seconds until the registration tone
sounds.
L The next step must be completed
within 90 seconds.
Handset
Press {OK}, then press {OFF} after a
long beep sounds.
For further registration information, visit
http://www.panasonic.com/RegisterYourHandset
{LOCATOR}
Press Locator
on base 4sec
then press OK
– 7 –
{MENU}
{OK}