Panasonic KX-TG6423 Quick Manual page 6

TG641x_QG(e).fm Page 6 Thursday, November 27, 2008 4:48 PM
Quick troubleshooting
2 No dial tone is heard from handset.
See if "Check
tel
Displayed
Lift up the handset from the base unit or
charger.
Press {C} at the handset, then check if
the display shows "Talk".
"No
No link. Re-
connect base
connect
AC adaptor.
AC
is displayed.
Check if the
telephone cord is
properly connected
to both the base
unit and telephone
line jack on the
wall.
Still displayed
Try to connect your
telephone into a
different line.
Still displayed
Your telephone may need service.
Please visit http://www.panasonic.com/help for further troubleshooting.
line" is shown on the handset display.
Not displayed
link. Re-
base
adaptor."
Press {s}, then check if
the dial tone is heard
from the speaker on the
back.
No dial tone
Try remedy for
1 on previous
page.
– 6 –
{C}
Talk
"Talk" is
Talk
displayed.
{s}
Dial tone is
heard.
Your telephone
may need service
when only back
speaker provides
a dial tone.