Download Print this page

Turbo Air TUR-28SD-D2 Installation And Operation Manual page 8

Full stainless steel visible exterior

Advertisement

BASIC OPERATION
REFRIGERATORS
1. The controller(thermostat) is located at the right inside of the unit.
2. The factory setting for the control is 'Normal'
3. Set toward 'Cool' for higher temperature and 'Cold' for lower temperature.
4. The thermostat controls compressor's on/off by sensing inside temperature.
OFF
NORMAL
COLD
Temperature Controller
(Thermostat)
- If thermostat knob is pointing at OFF, compressor and condenser fan
motor would no run.
- Keep unit unplugged, if not in use for a long period of time.
8

Advertisement

loading