Lenovo px2-300d User Manual page 99

Creating Local Users and Groups in Active Directory Mode
After an AD or local administrator logs in to the px2-300d, that user can create additional local users and
groups on the px2-300d. The Users and Groups page lists all local and AD users and groups on the px2-
300d.
1. On the Users and Groups page, click
2. In the Import Users and Groups from Active Directory page, under Local, click Users to create a
local user or Groups to create a group. You can add AD members to any local groups you create.
3. Enter the necessary credentials for the user or the group name, and click Create.
Creating Share Permissions for AD Users and Local Users
You can create access permissions for both AD and local users on any new or existing Shares on your
px2-300d. For more information, see
Switching to Workgroup Mode from Active Directory
You can switch your px2-300d from AD mode to Workgroup.
1. On the Domain Management page, disable the button to join Workgroup mode.
2. Click Apply.
After changing to Workgroup mode, if there are any administrator users on your px2-300d, you are required
to log back in to the px2-300d. You must log in as a local user, and you do not have the choice to select an
AD domain. Also, the Users and Groups page no longer lists the AD users and groups.
If you had not enabled security on your px2-300d prior to changing from Workgroup to Active
Directory, your px2-300d did not have any local users. Security is automatically enabled when
you configure AD. When you switch back to Workgroup, the Switch to Workgroup Mode dialog
box displays. You must create an administrator user because security is not disabled by
switching back to Workgroup. After creating the admin user, you remain logged in to the px2-
300d.
Add users and groups...
adding Shares and managing
Managing Your px2-300d Network Storage with Local and Active Directory Users
Securing Your px2-300d Network Storage and Contents
Shares.
89