Table of Contents
Advertisement
Step 5.
Slide the computer cover out to remove it.
Removing the front bezel
Note: For this procedure, it helps to lay the computer flat.
To remove the front bezel:
Step 1.
Remove the computer cover. Refer to "Removing the computer cover".
Step 2.
Remove the front bezel by releasing the three plastic tabs inside the chassis and pulling the bezel
out as shown.
Step 3.
To reattach the bezel, align the plastic tabs on the bottom of the bezel with the corresponding holes
in the chassis, and then snap it into position.
.
Chapter 8
Replacing hardware
25
Advertisement
Table of Contents
