Abit BG7E User Manual page 40

2-8
(7). FPAUD1: Front panel audio connection header
This header provides the connection to audio connector at front panel.
•
To use the audio connector at front panel, remove all the jumpers on this header, and then connect
to front panel by the extenson cable provided with the chassis.
•
To use the audio connector at rear panel, disconnect the extension cable, attach the jumpers back at
pin 5-6, and pin 9-10 (default setting).
Pin
1 Audio Mic.
3 Audio Mic. Bias
5 Speaker Out Right Channel
7 X
9 Speaker Out Left Channel
11 Ground
13 VCC
BG7E
Pin Assignment Pin Pin Assignment
2 Ground
4 VCC
Speaker Out Right Channel
6
Return
8 NC
10 Speaker Out Left Channel Return
12 S/PDIF In
14 S/PDIF Out
Chapter 2