Specifications - Toshiba MMY-MAP0501HT8-E Owner's Manual

12

Specifications

Model
MMY-MAP0501HT8-E,
MMY-MAP0501HT8Z-E,
MMY-MAP0501HT8ZG-E
MMY-MAP0601HT8-E,
MMY-MAP0601HT8Z-E,
MMY-MAP0601HT8ZG-E
MMY-MAP0801HT8-E,
MMY-MAP0801HT8Z-E,
MMY-MAP0801HT8ZG-E
MMY-MAP1001HT8-E,
MMY-MAP1001HT8Z-E,
MMY-MAP1001HT8ZG-E
MMY-MAP1201HT8-E,
MMY-MAP1201HT8Z-E,
MMY-MAP1201HT8ZG-E
MMY-MAP0501T8-E,
MMY-MAP0501T8Z-E,
MMY-MAP0501T8ZG-E
MMY-MAP0601T8-E,
MMY-MAP0601T8Z-E,
MMY-MAP0601T8ZG-E
MMY-MAP0801T8-E,
MMY-MAP0801T8Z-E,
MMY-MAP0801T8ZG-E
MMY-MAP1001T8-E,
MMY-MAP1001T8Z-E,
MMY-MAP1001T8ZG-E
MMY-MAP1201T8-E,
MMY-MAP1201T8Z-E,
MMY-MAP1201T8ZG-E
39-EN
Sound power level (dBA)
Weight (kg)
Cooling Heating
75 75 228
76 76 228
77 78 258
78 79 258
79 80 258
75 — 227
76 — 227
77 — 256
78 — 256
79 — 256
Declaration of Conformity
Manufacturer: Toshiba Carrier Corporation
336 Tadehara, Fuji-shi, Shizuoka-ken 416-8521 JAPAN
Authorized Nick Ball
Representative / Toshiba EMEA Engineering Director
TCF holder: Toshiba Carrier UK Ltd.
Porsham Close, Belliver Industrial Estate,
PLYMOUTH, Devon, PL6 7DB.
United Kingdom
Hereby declares that the machinery described below:
Generic Denomination: Air Conditioner
Model type: <Heat Pump Model>
MMY-MAP0501HT8-E, MMY-MAP0501HT8Z-E, MMY-MAP0501HT8ZG-E
MMY-MAP0601HT8-E, MMY-MAP0601HT8Z-E, MMY-MAP0601HT8ZG-E
MMY-MAP0801HT8-E, MMY-MAP0801HT8Z-E, MMY-MAP0801HT8ZG-E
MMY-MAP1001HT8-E, MMY-MAP1001HT8Z-E, MMY-MAP1001HT8ZG-E
MMY-MAP1201HT8-E, MMY-MAP1201HT8Z-E, MMY-MAP1201HT8ZG-E
<Cooling Only Model>
MMY-MAP0501T8-E, MMY-MAP0501T8Z-E, MMY-MAP0501T8ZG-E
MMY-MAP0601T8-E, MMY-MAP0601T8Z-E, MMY-MAP0601T8ZG-E
MMY-MAP0801T8-E, MMY-MAP0801T8Z-E, MMY-MAP0801T8ZG-E
MMY-MAP1001T8-E, MMY-MAP1001T8Z-E, MMY-MAP1001T8ZG-E
MMY-MAP1201T8-E, MMY-MAP1201T8Z-E, MMY-MAP1201T8ZG-E
Commercial name: Super Modular Multi System Air Conditioner
Complies with the provisions of the "Machinery" Directive (Directive 2006/42/EC) and the regulations transposing
into national law
Complies with the provisions of the following harmonized standard:
EN 378-2: 2008+A1:2009
NOTE
This declaration becomes invalid if technical or operational modifications are introduced without the manufacturer's
consent.
– 20 –
EN
40-EN