Sound Adjustment; Sdi Sound Output - Panasonic TH-42PH20U Operating Instructions Manual

SOUND Adjustment

1
2
Select to adjust each item.
3
Item
AUDIO MENU
BASS
TREBLE
BALANCE
Note: BASS and TREBLE settings are memorized separately for each AUDIO MENU.
Helpful Hint (
While the "SOUND" menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION
( ) button is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings.

SDI Sound Output

This menu is displayed when HD-SDI Terminal Board with audio (TY-FB10HD) is installed to the unit.
SDI SOUND OUTPUT
LEFT CHANNEL
RIGHT CHANNEL
SOUND OUT
LEVEL METER
Note:
This menu is available only when selecting a
slot that HD-SDI Terminal Board with audio
(TY-FB10HD) is installed.
Press to display the SOUND menu.
Press to select the menu to adjust.
Select the desired level by listening to the sound.
Press to exit from adjust mode.
STANDARD: Emits the original sound.
DYNAMIC: Accentuates sharp sound.
Adjusts low pitch sounds.
Adjusts high pitch sound.
Adjusts left and right volumes.
/ Normalization)
NORMALIZE
2/2
CHANNEL 1
CHANNEL 1
OFF
OFF
Details
Item
CHANNEL 1 to CHANNEL 16
LEFT CHANNEL
Selects left audio channel.
CHANNEL 1 to CHANNEL 16
RIGHT CHANNEL
Selects right audio channel.
ON
ON:
SOUND OUT
OFF: Disables audio output.
OFF
Sets audio channels to show in the audio level meter.
8 channels are displayed in the audio level meter; 4 channels
each on both right and left sides of the display.
LEVEL METER
OFF: Hides the audio level meter.
1-8CH: Displays the audio level meter (1-8ch)
9-16CH: Displays the audio level meter (9-16ch)
SOUND
NORMALIZE
AUDIO MENU
BASS
TREBLE
BALANCE
Details
OFF
Enables audio output.
1-8CH 9-16CH
1/2
NORMAL
STANDARD
0
0
0
27