Sony Xperia SL LT26ii User Manual page 104

To start the Smart Connect application
1 From your Home screen, tap
2 Find and tap Smart Connect.
To create a Smart Connect event
1 Start the Smart Connection application. If you are opening Smart Connect for
the first time, tap OK to close the introduction screen.
2 On the Events tab, tap
3 Give the event a name, then tap Create.
4 Under When, add either an accessory or a time interval, or both.
5 Under Do this, add what you want to happen in your device.
6 Under At the end, add what you want to happen when you disconnect the
accessory or when the time interval comes to an end. If both these conditions
are set, the actions start either when you disconnect the accessory, or when
the time interval comes to an end.
7 To save the event, press
To add a Bluetooth™ accessory, you have to first pair it with your device.
To edit a Smart Connect event
1 Start the Smart Connection application.
2 On the Events tab, tap an event.
3 If the event is switched off, tap
4 Adjust the settings as desired.
5
To save the event, press
To delete an incorrect entry, touch and hold the entry and then tap Delete.
This is an Internet version of this publication. © Print only for private use.
.
.
.
.
.
104