Installation - Acer FT220HQL User Manual

INSTALLATION

To install the monitor to your host system, please follow the steps as given
below:
Steps
1. 1-1 Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
1-2/1-3
Connect
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI cable to the computer or connect MHL
cable to the portable device.
2.
Connect the USB Cable(Optional)
3.Connect the Audio Cable(Only Audio-Input Model)(Optional)
4. Connect power adapter and power cord
Connect the pow
a properly grounded AC outlet.
5. Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer.
This sequence is very important.
6. If the monitor still does not function properly, please refer to the
troubleshooting section to diagnose the problem.
4
HDMI or MHL Cable
er adapter and power cord
HDMI HDMI
4
3
1-3 1-2
to the monitor, then to
VGA
USB
2
1-1
2
3
1-1 1-2 1-3
VGA
HDMI HDMI
USB
7