Installation - Acer XB270H User Manual

Installation

To install the monitor on your host system, please follow the steps below:
Steps
1 Connect the video cable
a Make sure both the monitor and computer are switched off.
b Connect the VGA video cable to the computer.
c Connect the digital cable (only for dual-input models).
(1) Make sure both the monitor and computer are switched off.
(2) Connect one end of the 24-pin DVI cable to the back of the
monitor and the other end to the computer's port.
d Connect the digital cable (only for DP models).
(1) Make sure both the monitor and computer are switched off.
(2) Connect one end of the 20-pin DP cable to the back of the
monitor and the other end to the computer's port.
e
Connect HDMI Cable (Only for HDMI-Input Model)(Optional)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect t he HDMI cable to computer. Or connect MHL cable
Or connect MHL cable(Only for MHL-Input Model)(Optional)
to the portable device
2 Connect the power cord
Connect the power cord to the monitor, then to a properly grounded AC
outlet.
3 Connect the USB Cable(Optional)
Connect the USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
Optional:Connect the audio input socket(AUDIO IN) of the LCD monitor
4
and the line-out port on the computer with the audio cable.
5
Turn on the monitor and computer
Turn on the monitor first, then the computer. This sequence is very
important.
6
If the monitor does not function properly, please refer to the
troubleshooting section to diagnose the problem.
USB3.0 port
-supporting
fast charge
USB3.0 port
USB
2
9