Panasonic VIERA TH-P42A2G Operating Instructions Manual page 7

Table of Contents

Advertisement

TH-P42A2G / TH-P42A2S / TH-P42A20M / TH-P42A20P / TH-P42A20R
Assembly screw (4)
(silver)
M5 × 18
Assembling the pedestal
Use the assembly screws
poles
to the base
Make sure that the screws are securely tightened.
Forcing the assembly screws the wrong way will strip
the threads.
"L" or "R" mark is stamped on the bottom of the pole.
Securing the TV
Use the assembly screws
Make sure that the screws are securely tightened.
Carry out the work on a horizontal and level surface.
Please contact your nearest Panasonic dealer to purchase the recommended wall-hanging bracket.
For additional details, please refer to the wall-hanging bracket installation manual.
Wall-hanging bracket
TY-WK4P1RW
Using other wall-hanging brackets, or installing a wall-hanging bracket by yourself have the risk
of personal injury and product damage. In order to maintain the unit's performance and safety, be
absolutely sure to ask your dealer or a licensed contractor to secure the wall-hanging brackets. Any
damage caused by installing without a qualified installer will void your warranty.
Carefully read the instructions accompanying optional accessories, and be absolutely sure to take
steps to prevent the TV from falling off.
Handle the TV carefully during installation since subjecting it to impact or other forces may cause
product damage.
Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or
pipes in the wall before hanging bracket.
To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use.
Assembly screw (4)
(black)
M5 × 30
to fasten the left and right
securely.
to fasten securely.
Hole for pedestal installation
Optional accessories
Rear of the TV
400 mm
300 mm
Holes for wall-hanging
bracket installation
Pole (2)
L
R
-
R
B
Arrow mark
[View from the bottom]
Screw for fixing the TV onto the
wall-hanging bracket
(not supplied with the TV)
Base
A
Front
-
L
D
Depth of screw:
minimum 15 mm,
maximum 30 mm
[View from the side]
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents