Panasonic VIERA TH-P42A2G Operating Instructions Manual page 28

Tuning and Editing Channels
Channel List Edit
Select a channel and reveal / hide
Channel List Editor
1
2
3
4
5
6
7
Auto Tuning
Start Auto Tuning
Auto Tuning
All tuning data will be erased
EXIT
Start Auto Tuning
RETURN
●
All the previous tuning settings are erased.
●
When the operation is completed, the channel at channel position "1" will be displayed.
●
Search begins in the order from the lower channels to the higher channels. Channels received
during this process are added to the list (see above).
●
If tuning has not been done completely
For Auto Tuning, using the buttons on the side panel of the TV (p. 11)
Press repeatedly until "Auto Tuning" appears
Access "Auto Tuning"
Start "Auto Tuning"
●
To return to TV
Manual Tuning
Manual Tuning
1
Fine Tuning
Manual Tuning
Sound System
Colour System
Select a channel position
28
Skip unwanted channels
Set all TV channels automatically
Settings are made automatically
TV
TV
F
Set channel manually
1
5.5MHz
5.5MHz
Auto Auto
reveal / hide
: reveal
: hide (skip)
select
●
To reveal all channels
Auto Tuning
2
S c a n 1
EXIT
"Manual Tuning" (see below)
F
Fine Tuning
●
Use to make small adjustments to the
CH57
tuning of an individual channel (affected by
CH33
CH33 120
weather conditions, etc.)
CH33
Manual Tuning
CH33
Set channel manually after Auto Tuning.
●
Set Sound System and Colour System,
and then perform this function. Set Colour
System "Auto" normally.
●
If a VCR is connected only with the RF
cable, select channel position "0".
Select a channel
You can hide unwanted
channels. The hidden
channels cannot be
displayed except in this
function.
Y
Use this function to skip
unwanted channels.
Automatically retune all
channels received in the
CH3
1 2 0
area.
Search and store
search
store