Table of Contents
Advertisement
Switching on the projector
Check external device connections before switching the projector on.
Power indicator
4)
1) Connect the power cord to the projector.
2) Connect the power plug to an outlet.
3) Press the <ON> side of the <MAIN POWER>
switch to turn on the power.
z The power indicator illuminates or flashes red.
4) Remove the lens cover.
z Be sure to remove the lens cover before starting
projection.
5) Press the power
<
z The power indicator illuminates green after flashing
for a while and projection starts.
3)
button.
|
/
>
Switching the projector on/off
5)
Attention
z Using the projector while the lens cover is attached
causes the device to heat up and can result in a fire.
Note
z When starting up the projector, a small rattling sound
may be heard or when the luminous lamp is lit a tinkling
sound may be heard, but this is not a malfunction.
z During video projection, the cooling fan operates and
makes a sound. This fan sound may change with
ambient temperature and becomes louder when the lamp
is turned on.
z Setting the [LAMP POWER] in the [OPTION] menu to
[ECO] reduces operation sounds. (
z When the lamp is turned off and immediately turned back
on again, the video may temporarily flicker slightly at the
start of projection due to lamp characteristics. This is not
a malfunction.
page 81)
ENGLISH - 29
Advertisement
Table of Contents
