Asus A7V Service Manual page 11

Top Case Module
T O P C A S E
The illustrations below show how to disassemble and remove the top case module of the
M O D U L E
notebook. The module contains the top case itself and touch pad module.
Removing Top Case Module
T O P C A S E
1.
M O D U L E
R E M O V E
2.
3.
4.
Remove 2 screws [M2 * 4(L)] (back - coaxial cable cover) and carefully
remove the Cable Cover.
Remove 2 screws [M2 * 4(L)] and disconnect the Coaxial cable & Inverter
cable with tweezers.
Carefully pull out the Antenna from the bottom case.
Coaxial cable
Inverter cable
Remove 2 screws [M2.5 * 8(L)] on rear side.
2 - 11
Disassembly procedure