Switching Source Signals; Adjusting The Volume - HANNspree DT12-10A1 User Manual

Switching Source Signals

Press the
SOURCE
remote control or the
on the control panel to select the
incoming source signal.
The current source setting CH xx
appears on the top left corner of the
screen; AV1 or AV2 appears on the
bottom right corner of the screen.
Note:
The TV supports S-Video input in addition to normal video and audio sig-
nals. The TV detects the signal type automatically and gives priority to S-
video when two signals are detected at the same time. This auto detection
function is only available for AV2.

Adjusting the Volume

Press the
VOL UP
volume. Press the
decrease the volume. The volume level
is displayed on the TV.
Press the
MUTE
control to turn the sound off. The word
"Mute" appears on the top left corner of
the screen and sound is temporarily
turned off.
Press the MUTE button on the remote
control or press the VOL UP button or
VOL DOWN button to restore the original volume.
button on the
button
SOURCE
button to increase the
VOL DOWN button
button on the remote
Current source setting
inderella inderella
C H 4 0
M
VOL
MENU
SOURCE
to
Mute
M
VOL
MENU
A V
TV
POWER
CH
SUORCE
TV/AV
inderella inderella
TV
POWER
CH
SUORCE
Volume up
Volume down
27