Table of Contents
Advertisement
Switching Source Signals
Press the
SOURCE
remote control or the
on the control panel to select the
incoming source signal.
The current source setting CH XX
appears on the top left corner of
the screen; AV1 or AV2 appears on
the bottom right corner of the
screen.
Note:
The TV supports S-Video input in addition to normal video and audio
signals. The TV detects the signal type automatically and gives priority to
S-video when two signals are detected at the same time. This auto
detection function is only available for AV2.
Adjusting the Volume
Press the
VOL UP button
increase the volume. Press the
VOL DOWN button
volume. The volume level is dis-
played on the TV.
Press the
MUTE button
remote control to turn the sound
off. The word "Mute" appears on
the top left corner of the screen
and sound is temporarily turned
off.
Press the
MUTE button
ton or VOL DOWN button
button on the
button
TV/AV
to
to decrease the
on the
on the remote control or press the
to restore the original volume.
Current source setting
C H 4 0
Volume up
down
Volume
MUTE
TV/AV (Source)
A V 1
TV/AV
VOL UP but-
27
Advertisement
Table of Contents
