Figure 7-8: Radius-Peap - Linksys WET54G-EU v3 User Manual

Wireless-G Ethernet Bridge
RADIUS and WPA RADIUS
This option features WEP or WPA used in coordination with a RADIUS server. (This should only be used when a
RADIUS server is present on the network.) It offers three authentication methods: PEAP, TLS, and TTLS.
If using RADIUS, WEP encryption is automatically selected. If using WPA RADIUS, then you must choose the
WPA Algorithm, TKIP or AES, on the RADIUS server. (Screens shown are for RADIUS Security Mode, WPA RADIUS
will have the option to choose the WPA setting)
EAP Type:
PEAP
User ID and Password. A user identification and password are required for your security. Enter the ID in the
the receiving device (wireless client) is using the same key.
When finished making your changes on this tab, click the Apply button to save these changes.
Chapter 7: Using the Wireless-G Ethernet Bridge Web-based Utility
Setup

Figure 7-8: RADIUS-PEAP

.
21