Nikon s4300 Reference Manual page 173

The Setup Menu
3
Tap o.
• The time zone selection screen is displayed.
4
Tap E or F to choose the travel destination
time zone and tap I.
• If daylight saving time is in effect, tap p to enable
daylight saving time function. W is displayed at the top
of the monitor and the camera clock is advanced one
hour. Tap p again to disable the daylight saving time
function.
• While the travel destination time zone is selected, the Z icon will be displayed in the
monitor when the camera is in shooting mode.
C
w Home Time Zone
• To switch to the home time zone, tap w Home time zone in step 2.
• To change the home time zone, tap w Home time zone in step 2 and perform the same
procedure as for x Travel destination to set the home time zone.
C
Daylight Saving Time
When daylight saving time starts or ends, turn the daylight saving time option on or off from the
time zone selection screen displayed in step 4.
C
Imprinting Date on images
Enable the Print date option (E70) in the setup menu after the date and time have been set.
When the Print date option is enabled, images will be recorded with shooting date imprinted on
them.
E66
Time zone
Home time Travel
zone destination
Travel destination
10:30 -05:00