Troy-Bilt 020287 Operator's Manual page 16

Section 5: Maintenance
Pump Maintenance
Changing Pump Oil
Change oil after first 50 hours of operation and then every
200 hours or 3 months, whichever occurs first.
NOTE: When changing pump oil, use only high quality
nondetergent 30 weight oil and fill to FULL mark on
dipstick. Use no special additives.
Changing the pump oil requires disassembly of the pump
from the engine. For this reason, we recommend you have
a qualified service dealer change the pump oil per
recommended intervals.
Data Tag
Data tag information is very important if you need help from
our Customer Service Department or an authorized service
dealer.
• The data tag (Figure 16) is located on the base of the
pressure washer. For future reference, please copy the
model, revision, and serial number of the pressure washer
in the space below.
Figure 16 — Data Tag
MODEL
REV NO
SERIAL
PSI
GPM
16
Copy Model
Number Here
Copy Revision
Here
Copy Serial
Number Here