1160 Antenna Assembly And Lcd Cover - Lenovo ideapad 310 Hardware Maintenance Manual

Hide thumbs Also See for ideapad 310:
Table of Contents

Advertisement

Lenovo ideapad 310-14ISK/ideapad 310-15ISK/ideapad 310 Touch-15ISK/

1160 Antenna assembly and LCD cover

For access, remove these FRUs in order:
• "1010 Hard disk drive(HDD) slot compartment cover" on page 35
• "1020 Hard disk drive" on page 36
• "1030 Memory/Mini PCI Express Card slot compartment cover and DIMM"
on page 39
• "1040 PCI Express Mini Card for wireless LAN/WAN" on page 41
• "1050 Optical drive" on page 43
• "1060 Keyboard bezel" on page 44
• "1070 System board" on page 46
• "1080 Fan assembly and Heat Sink assembly" on page 50
• "1090 LCD unit" on page 52
• "1100 Battery pack" on page 54
• "1110 Speakers, base cover, USB board and ODD transfer board" on page 56
• "1120 LCD front bezel" on page 62
• "1130 LCD panel and LCD cable" on page 63
• "1140 LCD hinges" on page 65
• "1150 Integrated camera" on page 66
Figure 16. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the cables from
the cable guide, and then remove the antenna assembly in the direction shown
a
by arrows
.
a
a
When installing: Route the antenna cables along the cable guides and secure the
antenna boards with adhesive tapes. As you route the cables, make sure that they
are not subjected to any tension. Tension could cause the cables to be damaged
by the cable guides, or a wire to be broken.
67

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents