Changing Backlight Intensity; Turning Local Dimming On Or Off; Changing Frame Delay - Planar UltraRes 4K User Manual

Changing Backlight Intensity

Changing Backlight Intensity
To change the brightness of the display, use the
you want a brighter display, move the slider towards a higher number. If you want to
conserve power and increase backlight life, move the slider towards a lower number.

Turning Local Dimming On or Off

Local Dimming allows the LED edge lighting to dynamically adjust based on the
source content. Turning this feature on shows darker black levels, which in turn has a
higher contrast ratio. Because this feature dims a large area at once, the performance
may not be as good as direct array LED backlighting.

Changing Frame Delay

With some quadrant sources, the top and bottom halves of display can show frame
tearing, at a delay of one frame per second. If you see frame tearing, use the
FRAME DISPLAY
46
and
BOTTOM HALF FRAME DELAY
Planar UltraRes User Manual
slider on the Display tab. If
BACKLIGHT
sliders to compensate.
TOP HALF