Table of Contents
Advertisement
Dishwasher must be level for proper dish rack operation and wash performance.
1
Place level on door and rack track inside the tub as shown to check that the
dishwasher is level.
2
level the dishwasher by adjusting the four leveling legs individually.
3
When level the dishwasher, please pay attention not to let the dishwasher tip over.
【
Figure 8
Illustration of feet adjustment
NOTE:
The maximum adjustment
height of the feet is 60 mm.
WARNING!
Plea se look at the rating label to know the rating voltage and connect the dishwasher to the appropriate power supply.
Use the required fuse 10 amp , time delay fuse or c ircuit breaker recommended and provide separate circuit serving
only this appliance.
This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of
electric shock by providing a path of least resistance for the electric current. This appliance is equipped with a
cord having an equipment-earthing conductor and an earthing plug. The plug must be plugged into an
appropriate outlet that is installed and earthed in accordance with all local standards and requirements.
】
Check
Level
Front
to Back
for personal safety:
DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.
DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE EARTHING
CONNECTION FROM THE POWER CORD.
Ensure the voltage and frequency of the power being correspond s to
those on the rating plate. Only in sert the plug into an electrica l socke t which is earthed
prop erly. If the electrical socket to which the appliance must be connected is not
appropriate for the plug , replace the socket, rather than using a a daptors or the like as
they could cause ove rheating an d burns.
Check level
side to side
21
Advertisement
Table of Contents
