Guided Tour - Ax1 Handheld Transmitter - Samson AirLine 77 Owner's Manual

Guided Tour - AX1 Handheld Transmitter

Samson AirLine
1: XLR connector - Connect this standard female XLR connector
into any standard wired dynamic microphone in order to make it a
wireless mic.
2: Rubber gasket - If necessary, use this provided rubber gasket in
order to make a solid connection between the AX1 XLR connec-
tor and your microphone (note that not all microphones require its
use).
3: Power on-off switch - Move this switch in the direction of the
arrow to turn power to the AX1 on; move it away from the arrow
to turn power off. (to conserve battery power, be sure to turn the
AX1 off when not in use). Be sure to
mute the audio signal at your exter-
nal mixer or amplifier before turn-
ing the AX1 power on or off, or an
audible pop may result.
4: Power / Battery LED - This
LED flashes once when the AX1 is
first turned on and lights steadily red
when there is less than 2 hours of
battery power remaining, indicating
that the battery needs to be changed.
12