Table of Contents
Advertisement
Selecting a supported display mode
The display mode the monitor uses is controlled by the computer. Therefore, refer to
your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and the
image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to re-
attach the CRT monitor temporarily until you have re-configured the system;
preferably to 1366 x 768 at 60 Hz, which is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-3. Factory set display modes
Addressability
NTSC
PAL
640x350
640x480
720x400
800x600
832x624
1024x768
1152x864
1280x1024
1360x768
1366x768
Refresh rate
60Hz
50Hz
70Hz
60Hz， 72Hz， 75Hz
70Hz
56Hz ，60Hz，72Hz, 75Hz
75Hz
60Hz， 70Hz， 75Hz
75Hz
60Hz， 70Hz， 75Hz
60Hz
60Hz
Chapter 2.
2-7
Advertisement
Table of Contents
