Table of Contents
Advertisement
Explanatory Notes
a
Menu
b
Subwoofer
c
Yes:
Select if a subwoofer is connected.
No:
Select if no subwoofer is connected.
a Menu selection
b Setting target
c Setting options (default setting underlined)
HDMI Input
Menu
If you connect a video component to an HDMI input, you
must assign that input to an input selector. For example, if
you connect your Blu-ray Disc/DVD player to HDMI
IN 2, you must assign "HDMI2" to the "BD/DVD" input
selector.
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TV/CD
PORT
■
BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,
TV/CD, PORT
HDMI1, HDMI2, HDMI3, HDMI4:
Select the corresponding HDMI input, to which the
component has been connected.
- - - - -:
Select if you're not using the HDMI OUT.
Each HDMI input cannot be assigned to two input
selectors or more. When HDMI1 - HDMI4 have
already been assigned, you must set first any unused
input selectors to "- - - - -", or you will be unable to
assign HDMI1 - HDMI4 to other input selectors.
Note
• When an HDMI IN is assigned to an input selector as explained
here, the digital audio input for that input selector is
automatically set to the same HDMI IN.
• Do not assign the component connected with the HDMI input to
TV/CD selector when you set the "HDMI Ctrl (RIHD)" setting
to "On"
(➔
page 48). Otherwise, appropriate CEC (Consumer
Electronics Control) operation will not be guaranteed.
• If you connect a component (such as UP-A1 Dock that seated
iPod) to UNIVERSAL PORT jack, you cannot assign any input
to PORT selector.
En
40
Sp Config
HDMI Input
Default assignment
HDMI1
HDMI2
HDMI3
HDMI4
- - - - -
- - - - -
- - - - -
Component (Component Video Input)
Menu
Component
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2, you must assign "IN2" to
the "BD/DVD" input selector.
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TV/CD
PORT
■
BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,
TV/CD, PORT
IN1, IN2:
Select the corresponding video input, to which the
video component has been connected.
- - - - -:
Select if you're not using the COMPONENT
VIDEO OUT.
Note
• If you connect a component (such as UP-A1 Dock that seated
iPod) to the UNIVERSAL PORT jack, you cannot assign any
input to PORT selector.
Digital Audio (Digital Audio Input)
Menu
Digital Audio
If you connect a component to a digital audio input, you
must assign that input to an input selector. For example, if
you connect your CD player to the OPTICAL IN 1, you
must assign "OPTICAL1" to the "TV/CD" input
selector.
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TV/CD
PORT
■
BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,
TV/CD, PORT
COAXIAL1, COAXIAL2, OPTICAL1,
OPTICAL2:
Select the corresponding digital audio input, to
which the component has been connected.
Default assignment
IN1
- - - - -
IN2
- - - - -
- - - - -
- - - - -
- - - - -
Default assignment
COAXIAL1
- - - - -
COAXIAL2
OPTICAL1
- - - - -
OPTICAL2
- - - - -
Advertisement
Table of Contents
