Russell Hobbs RHM1710 User Manual page 13

For foods exceeding the maximum weights, please use the jet defrost function.
Program cooking with Jet defrost and Weight defrost
You can program the oven to defrost food using either the jet defrost or weight defrost
and then cook the food. To defrost 600g and cook for 10 minutes.
Using the Jet defrost function
1 Press the 'Jet defrost' key pad. The display will show ':0' and the jet defrosting
symbol will light up.
2 Press the numerical key pads to enter the time you want the food to defrost for.
For example, if you want to defrost the food for 25 minutes, press '2500'.
3 Do not press the 'Start' key pad, instead press the 'Memory' key pad. The
display will show '1s' (first stage cooking).
4 Press the 'Time' key pad, the display will show ':0'. Enter the time you want to
cook the food for using the numerical key pads. For example, to cook for 10
minutes, press '1000'.
5 To set the power, press the 'Power' key pad, the display will show 'P10'. If you
want to choose a different power level setting, press the 'Number' key pad you
want from the chart on page 8. For example, if P5 is chosen, P5 will be
displayed.
6 Press the 'Start' key pad.
The food will now defrost and then cook for 10 minutes, when the program has finished
the oven will beep 3 times and continue to beep every 2 minutes until the door is
opened or the 'Cancel' key pad is pressed.
Using the Weight defrost function
To defrost and cook 600g's of food for 10 minutes.
1 Press the 'Weight defrost' key pad 3 times, the display will show the weight
defrost symbol and 'd3'.
2 Press the numerical key pads 600 to enter 600g, this will be displayed.
3 Do not press the 'Start' key pad, instead press the 'Memory' key pad. The
display will show '1s' (first stage cooking).
4 Press the 'Time' key pad, the display will show ':0'. Enter the time you want to
cook the food for using the numerical key pads. For example, to cook for 10
minutes, press '1000'.
5 To set the power, press the 'Power' key pad, the display will show 'P10'. If you
want to choose a different power level setting, press the 'Number' key pad you
want from the chart on page 8. For example, if P5 is chosen, P5 will be
displayed.
12