D-Link DP-G310 Quick Installation Manual page 5

Setting up your DP-G310 for
network printing in Windows XP
(continued)
Click on the Configuration tab to view
the current Wireless Settings.
1
Select your Connection Mode
2 Enter the SSID
access point or wireless rout-
er you wish to connect to.
If you would like to set
3
WEP Encryption, select the
encryption level and the key
here.
Click on the System tab to view
the current Port Settings.
Write down on a piece of paper the
Port name that you wish to use.
1
Ad-Hoc:
Refers to two or more 802.11b wireless devices that communicate directly
with one another without using an access point or any connection to a wired network.
Infrastructure:
with each other by first going through an Access Point (AP) or wireless router.
2
A workgroup name of your Wireless Network. All wireless devices must all have the
same SSID to communicate on the Wireless Network. All D-Link Wireless devices have
the default SSID of default, all lower case.
3
64 bit WEP encryption uses a 10 hexidecimal character key.
hexidecimal character key. The WEP encryption key must match the WEP settings on
your AP or wireless router to connect properly.
of the remote
What is Infrastructure and Ad-Hoc Mode?
Refers to an 802.11 network in which wireless devices communicate
What is an SSID?
How does WEP Work?
5
PS-121B28-U1
128 bit WEP uses a 26