Selecting An Input Signal - ViewSonic pj650 User Manual

Selecting an Input Signal

Using the remote control
If selecting RGB input
Press the RGB button
Press this button to toggle between the devices connected to RGB IN 1 and 2. As illustrated below, each time
you press the RGB button, the projector switches between RGB IN 1 and 2.
Select the signal you wish to project.
If selecting video input
Press the VIDEO button
Press this button to toggle between the devices connected to VIDEO IN, SVIDEO IN and COMPONENT
VIDEO. As illustrated below, each time you press the VIDEO button, the projector switches between VIDEO
IN, S-VIDEO IN and COMPONENT VIDEO. Select the signal you wish to project.
Using the projector's control panel
Press the INPUT button
As illustrated below, each time you press the INPUT button, the projector switches between its input signal
ports. Select the signal you wish to project.
Use the zoom ring to adjust the screen size
Use the focus ring to focus the picture
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
ViewSonic PJ650/PJ520 16