Safety Instructions • Read and save these instructions. • Follow all warnings and instructions marked on the product. • Always turn off and unplug the machine before moving, cleaning, or conduct other than normal operation. • Operate shredder from the power source indicated on the serial label or power supply. If you are not sure of the type of power available, consult your dealer or a power company.
Operation PS25 • Follow instructions for sheet capacity. (See Table A) PS25 Plus • Position paper over entry. PS30 • Depress power switch to the ON (I) position to start cutting system. PS30 Plus • Return the power switch to the OFF (O) position to stop cutting system. PS35/PS40 PS50 •...
Safety & Maintenance of PS55CC The PS55CC cross cut shredder creates small particles that, if allowed to accumulate, cause the shredder to jam. Follow these simple precautions to significantly reduce the likelihood that particles will accumulate and to keep your cross cut shredder operating at peak efficiency: •...
Red light = capacity exceeded. 1. Empty the basket if it is full. DM-3 2. Reverse out the paper being fed into the shredder. PS45 3. Divide the paper being shred into smaller packets that are within the stated capacity of the shredder. PS55 4.
Fellowes Manufacturing Company warrants the cutting cylinders of all Fellowes shredders to be free from defects in material and workmanship for five years from the date of purchase by the original consumer. Fellowes warrants all other parts of the machine to be free of defects in material and workmanship for one year from the date of purchase by the original consumer.
Declaration of Conformity Fellowes Manufacturing Company Doncaster, South Yorkshire, DN31H England Models PS25, PS30, PS35 and PS40, with or without the suffix “Plus” conforms with the requirements of the Low Voltage Directive (73/23 EEC) and the Electromagnetic Compatibility Directive (89/336 EEC) and the following harmonized European Normes (EN Standards) and IEC Standards.