Sanyo PLC-XL50 Owner's Manual page 36

Computer Input
For zooming in and out the images
Digital zoom +
When Digital zoom + is selected, the On-Screen Menu
disappears and "D. zoom +" is displayed. Press the SELECT
button to expand the image size. Use the Point
buttons to pan the image. The Panning function can work
only when the image is larger than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM button on the remote control.
e
Digital zoom –
Digital zoom - is used to reduce the image size into its
original size when the image size is expanded.
When Digital zoom – is selected, the On-Screen Menu
disappears and "D. zoom –" is displayed. Press the SELECT
button to compress image size. The projected image can be
also compressed by pressing the D.ZOOM
remote control.
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM , SELECT, and Point buttons.
ed
To return to the previous screen size, select a screen size in
the Screen Size Adjustment or select an input source from
the Input Source Selection (p.27) again, or adjust the screen
size with the D.ZOOM
36
ed7 8
button on the
d
buttons.
ed
/
Remote Control
POINT buttons
SELECT button
D.ZOOM + button
D.ZOOM - button
CEILING
✔Note:
•The panning function may not operate
properly if the stored Mode in the PC
Adjust Menu is used (p.31).
•True, Full, and Digital zoom +/– cannot be
selected when 480i, 575i, 480p, or 575p
is selected in the PC System Menu (p.28).
•Digital zoom +/– cannot be selected when
Full or True is selected.