Page 2
Table of Contents 1. Important Safety Instructions ..........3 2. Package Content ............... 4 Package Details ..............4 LED Definition ..............5 Button Definition .............. 5 Planning your Powerline Network ........6 3. Connecting Powerline Ethernet Bridge ......... 7 Hardware Installation ............7 Utility Installation for Windows ...........
Page 3
1. Important Safety Instructions This product is intended for connection to the AC power line. The following pre-cautions should be taken when using this product: Please read all instructions before installing and operating this product. Please follow all warnings and instructions marked on the product.
Page 4
PL-701 x 1 (PL-701 x 2 for PL-701-KIT) CD-ROM x 1 (User’s Manual, Quick Guide and Utility) RJ-45 Cable x 1 (RJ-45 Cable x 2 for PL-701-KIT) Quick Installation Guide x 1 If any of the above items are missing or damaged, contact your local dealer for support.
Page 5
LED Definition Status Description Steady on indicate the Powerline device Power connect to the power outlet Blinking Blinking indicates the data are transferring Steady on indicates the RJ-45 port has Ethernet correctly connected to the network card of your PC or the Ethernet network If the powerline device serving as a STATION (STA), the LED indicator will Blinking...
Page 6
ADSL Router 1000Base-T UTP Power With a PL-701 and the other Powerline device installed, a network can be created over residential Powerline of your house. PL-701 can be connected to Ethernet switch, hub, and broadband router or directly connected to PC.
Page 7
3. Connecting Powerline Ethernet Bridge Hardware Installation Setp 1. Connect one Powerline Ethernet bridge to your ADSL or Cable modem’s Ethernet port. Setp 2. Plug it into the nearest power socket. Setp 3. Plug in the second Powerline Ethernet bridge next to your PC and connect the Ethernet ports.
Page 8
1. Insert the CD into the CD-ROM drive to initiate the Autorun program. Once completed, a menu screen will appear. 2. Click on the “Powerline Configuration Utility” hyperlink in PL-701 field to start the installation. If the menu screen is not shown, you can start the installation as follows. Click on Start Menu/ Run.
Need help?
Do you have a question about the PL-701 and is the answer not in the manual?
Questions and answers