Setting The Unit; Terminal Cover; Power Indicator; Subsonic Select Switch - Pioneer PRS-D1100M Owner's Manual

Setting the Unit

• To adjust the switch, use standard tip screwdriver if needed.

Power Indicator

The power indicator
lights when the power
is switched on.

Bass Boost Control

You can select a bass boost level from
0, 6, 9 and 12 dB.
For instruction of connecting the bass
boost remote control to the amplifier,
see the "Connection Diagram" section.
3

Terminal Cover

Before setting up the unit, unfasten the
screws with a 4 mm hexagonal wrench
and remove the terminal cover.

Subsonic Select Switch

The subsonic filter cuts inaudible
frequencies below 20 Hz to eliminate
unwanted vibrations and minimize
power loss.
BFC (Beat Frequency Control)
Switch
BFC switch is on the bottom of the unit.
If you hear a beat while listening to an
AM broadcast with your car stereo,
change the BFC switch using a small
standard tip screwdriver.