Configuring The Studioz Driver - Intergraph StudioZ User Manual

Configuring the StudioZ Driver

Once the driver is installed and started, you can change the configurations to meet your
specific needs.
To configure the StudioZ driver:
1. Close any applications that rely on the StudioZ driver (such as StudioZ Central Plus or
Adobe Premiere).
NOTE Adjustments you make to the StudioZ driver configuration, particularly the Genlock Phase
Adjust parameter, will not take effect when the driver is under an application's control. When
you restart the application, changes you made to the StudioZ driver configuration will take
effect.
2. From the Windows NT Start menu, go to Control Panel/Multimedia.
3. On the Multimedia Properties dialog box, click the Devices tab, then double-click Video
Compression Codecs from the list of devices.
4. Double-click Intergraph StudioZ Driver (or Intergraph StudioZBurst Driver) from the
list of video compression codecs.
5. On the Intergraph StudioZ Driver Properties tab, click Settings to display the StudioZ
Driver Configuration parameters:
5