ASSEMBLY INSTRUCTIONS:
Copper Canyon 4 & 6 Tents
Component List:
1 Tent Body with Guy Ropes, 4 Wall Poles, 2 Roof Poles,
1 Fly, 1 Carry Bag, 1 Stake Bag and Stakes, 1 Pole Bag
Roof poles
Wall poles
Spread the tent out with the top side up.
Assemble the long roof poles
and slide them through the
sleeves, diagonally across
the roof.
Insert the ferrules into the
ribbed section of the
corner elbows.
Insert the pin from the
corner web/rings into
the bottom ferrules.
Raise the other side to make a freestanding structure.
Clip the tent to the wall poles.
Then dress out the
tent as you stake
the web loops down.
Raise one side of the roof and
Drape the fly over the tent so
that the yellow webs meet.
insert the wall poles into the
Then pull the fabric out and
the bottom of the elbows.
over the corner elbows.
At the corners, reach under the fly
and wrap the hook & loop straps
around the wall poles.
Lastly, this a tall, straight sided tent; it is
important that you stake out all of the guylines.
Again at the corners, attach the J-hooks
to the nylon rings on the webs.
YOUR TENT IS READY !
REV A 6.11
Need help?
Do you have a question about the Copper Canyon 4 & 6 Tents and is the answer not in the manual?
Questions and answers