Alarm Operation - Sharp DK-CL8PH(BK) Operation Manual

Listening to the radio (continued)
DK-CL8PH(BK)
DK-CL8PH(GR)
DK-CL8PH(PK)
Note:
The batteries system protects the programmed stations should
there be a power failure or the AC/DC adaptor becomes
disconnected. If the backup batteries are drain off, the
programmed stations will be erased.
■ To recall a programmed station
Press CLOCK/MEM. button then press
repeatedly to select the desired programmed station.
14

Alarm operation

■ Alarm
The unit turns on and play desired source (iPod or TUNER) or
Buzzer sound for 1 hour alarm duration.
Before setting the alarm:
1 Check that the clock is set to the correct time.
(refer page 10)
If it is not set, you cannot use the alarm function.
or button
2 For iPod or iPhone playback: Insert iPod or iPhone to the
unit. (refer page 12)
3 For TUNER: Set preset memory. (refer page 13)
Setting the alarms
In this example, the setting is for ALARM 1. The same method
is used to set for ALARM 2.
1
In standby mode, press and hold the AL 1 button until
the alarm time blinking.
2
Press the (
press the AL 1 button.
Press the (
1 hour. Hold it down to advance continuously. "AM" or "PM"
indicator will interchange after each 12 hour cyclic.
1
or ) button to adjust the hour and
PM
) button once to advance the time by
or