Fbt HiMaxx40A Specifications

FBT H M
i
S p e a k e r S y s t e m s
Hi MaxX 40a
2 Way Bi-Amped Processed Active Monitor System
The Hi Maxx 40a weighs only 39.5 lbs
and delivers 127dB SPL !
>
500w RMS Class D (LF) Power Amplifier
>
150w RMS Class G (HF) Power Amplifier
Comparing to the FBT Maxx 4a, these
New Class D & G amplifiers offer an
Increased power capacity of +200w for
the LF woofer and +50w for the HF
driver. Peak power has almost
DOUBLED with up to 1000 watts to the
12" B&C LF woofer.
>
+4dB more SPL than the Maxx 4a,
thanks to the higher power handling and
a woofer offering lower power
compression and FBT's Exclusive New
ADAP® 2 -
(Advanced Dynamic Active Protection)
Limiter/Protection Circuitry.
>
90% amplifier efficiency with FBT's new
switch mode power supply
and Class G amplifier for the B&C® HF
custom compression driver.
>
1% -5% Military spec electronic
components used in all electronic circuitry
for superior sound and reliability.
> Excellent WEIGHT to POWER Ratio.
The Hi Maxx 40a weighs just about 4 lbs. more
than the FBT MaxX 4a while the total power
capacity has almost doubled.
>
New FBT proprietary designed 12" (3' VC)
®
B&C custom neodymium magnet woofer,
with a more efficient ventilation system results in
a 1.5dB reduction of power compression and
features a new rigid cone for increased reliability.
>
New B&C 1.7"HF Neodymium Magnet
Compression Driver coupled to a 90°H x 60°V
CD horn.
>
The New FBT proprietary gas-injection
polypropylene molded asymmetrical
trapezoidal design enclosure offers: a
lightweight, yet extremely sturdy cabinet with the
flexibility for many sound system applications.
Hi Maxx 40a Vs Maxx 4a :The total cabinet
volume has increased by +5Lt of load to
the woofer, while maintaining the same
width and height of the FBT MaxX 4a while
producing a more powerful (+4 dB) bass
response.
The reflex tuning ports are a new design
and are optimized to reduce turbulence
and compression.
>
New Combined Gain and Volume
Functions in the same rotary
potentiometer offer easier and quicker
volume settings and provide an improved
dynamic range and S/N ratio at the input
stage.
*2 independent input channels
1 x XLR/ combo Jack, 1 x AUX L/R RCA
jacks and volume control to connect to
external devices such as MP3, PC and
CD players.
*This feature may replace the use of an
external mixer for a simple application
such as using 1 microphone and a music
player source.
>
Control Panel also features:
3-band Equalization (High/Mid/Low)
Ground Lift Switch,
3 Status LED's: Power, Limiter,
Protection
> 3 yr. Parts & Labor Warranty
>
COMPLETELY MADE IN ITALY
x
ax
NEW - NOT JUST ANOTHER ORDINARY 2 way Powered Plastic Speaker Cab!
TM
The New FBT Hi Maxx 40a.easily Crushes all other Competitors similar 2 way models in
sound quality, SPL and weight to power ratio.
x
Hi M a x 4 0 a