Setup Menu - D-Link DSL-562T User Manual

DSL-562T ADSL Router User's Guide

Setup Menu

The Setup window offers links to menus to configure settings for the LAN (Local Area Network) and for the
WAN (Wide Area Network) setup. The first menu you see when clicking the Setup tab or the Go to setup
wizard hyperlink is the Setup menu.
Now you are ready to configure the settings needed for the WAN connection. All the information you need to
make the changes needed for a functioning WAN connection should have been provided to you by your ISP or
network service provider.
Figure 3-3. Opening Setup window
If you are not instructed to change the modulation type, click the Connection 1 button or hyperlink to configure
the other WAN settings. Skip ahead to Configure Connection below to configure a PPPoA connection type. To
configure other connection types go.
If you are instructed to change the method of modulation used for ADSL, click the Modem Setup button or
Modem Setup hyperlink and select the Modulation Type used for the connection. Skip ahead to the next page for
an example of the Modem Setup menu. Then proceed to Configure Connection to configure a PPPoA connection
or Change the Connection Type for other connection types.
17