Rear Panel Connections - D-Link DSL-562T User Manual

Rear Panel Connections

All cable connections to the Router are made at the rear panel. Connect the power adapter here to power on the
Router. Use the Reset button to restore the settings to the factory default values (see Factory Reset Button in the
next chapter for instructions on using the reset button).
USB port,
connect USB
cable here and
install USB
driver
ADSL port,
connect ADSL
cable here
The Router may be rebooted by disconnecting and then reconnecting the power.
Note
DSL-562T ADSL Router User's Guide
Ethernet
port,
connect
Ethernet
cable here
5
Factory
Reset
button
Power cord
connects
here