Brother 885-V52 Operation Manual page 47

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
e Gently remove the fabric from the frame
without loosening the adjustment screw.
Memo
This precautionary step will help reduce
pattern distortion while embroidering.
f Press the inner frame in from the top of the
fabric again, lining up
and on outer frame.
a Outer frame
b Inner frame
c Fabric (right side)
d Stabilizer material
e Ledge of outer frame
• Press down firmly until the inner frame is
securely pressed against the ledge of the
outer frame.
on the inner frame
3
1 2
5 4
g Tighten the adjustment screw while removing
any slack in the fabric by hand. The goal is to
have a drum-like sound when the stretched
fabric is struck lightly.
■ Using embroidery sheets
If the embroidery sheet attached to the embroidery
frame is used, the pattern can be embroidered in
exactly the right position on the fabric.
Embroidery sheet
(medium)
Embroidery sheet (large)
[option]
Make a mark with a chalk pen at the center of
a
the position for the pattern to be embroidered.
a Embroidery pattern
b Mark
Embroidery sheet (small)
[option]
a
b
Preparing the Fabric 45
1