9.4 Email Event Configuration
The Administration
alert notifications for the system.
You can have alerts sent to a mobile phone or other SMS compatible device by
using a third party product that converts the SMTP messages to SMS and then
redirects them to the SMS compatible device. If you use this, the SMTP messages
should be sent to the e-mail address provided by the third party provider.
Steps to setup Email Event Configuration:
1. On the Administration
"Enable" option to enable SMTP.
2. Configure the SMTP Server IP, SMTP Server Domain, Sender, Recipient(s),
and Subject as necessary.
3. If needed, check the "Enable authentication" option, and enter in
"Authentication User" the username of the user who will authenticate the
Email Event Configuration screen allows you to set up
Email Event Configuration screen, check
FIBRE-to-SAS/SATA RAID SUBSYSTEM
User Manual
127